quote-head
   
Contact Person:*
Address:*
E-mail:*
Mobile No.:*
Phone:
Ex:001-123-456-7890
Description:
Enter Code:*
 
 
We value your privacy. See Privacy Policy .
*
Required Fields.

Why Jay Khodiyar Machine Tools

  • Premium Briquetting Machines
  • Pioneer of the Industry
  • Fast On-time Delivery
  • Regulated and Approved
  • State-of-the-Art Laboratory
  • Futuristic & Technology-driven

Turbo Dryer

JKbioenergy JKbioenergy JKbioenergy JKbioenergy JKbioenergy (56 Customer Ratings) | write a review Turbo-Dryer
Roll over image to magnify JKbioenergy
  • Description
  • Technical Specification
  • Reviews

Certain raw materials containing moisture content beyond 45% (wet basis), need to be treated for moisture evaporation to bring the moisture content to acceptable limit of 15%. For suspension drying of fibrous materials like bagasse, jute, coir pith etc., turbo dryer or agro waste dryer is required.

GENERAL DESCRIPTION:

The system consists of screw conveyor, vibrating screen, feeding hopper vane guide, conveying line including insulated drying column and conveying line through which wet or moist material is conveyed with hot air. A powerful low pressure open wheel centrifugal fan assures significant resilience time for removal of excess moistures. Material is conveyed to cyclone and discharged through air tap duct.

MOISTURE EVAPORATION CAPACITY : 450kg./hr.
OUTPUT : 1500 kg./hr.
MAXIMUM INPUT MOISTURE : 35%
OUTLET MOISTURE : 15%
CENTRIFUGAL FAN MOTOR : 15 HP
VIBRATING SCREEN : 2 HP
SCREW CONVEYOR MOTOR : 2 HP
 
Hot air temp. is kept according to the requirement from moisture of material. Your flue gas temp of 150 deg cent will not serve the purpose as material, even at 30-35 % moisture level, will require 300-350 deg cent. Also, for 50 % material, the temp may be used at about 500-550 deg cent.
 
Flow rate will be around 10,000 cmh.
 
This I have mentioned to you earlier also. The dryer is flexible at the joints, i.e., at the bends. So, you can take a 90 deg turn at any of the joints. Hence, including HAG, the dryer size could be 30 x 15 ft or 25 x 25 ft. with a height of about 29 ft.
 
We, as a Briquetting Press manufacturer., recommend Hot Air Generator, using thermal heat with briquettes or biomass as raw material, to be the source.
 
We use a SS chicken mesh at the outlet of furnace, which is sufficient to arrest any leftover spark in the flue gas, after it has travelled through 2-3 ups & downs in the Furnace.
 
With 50 % input and 14 % output of bagasse, CTD dryer will give an output of approx. 1500 kgs/hr.

Turbo Dryer plays an important role in briquetting process. It reduces more than 25 % of moisture content from raw material which helps to maintain the better quality of Briquettes. It has high evaporation capacity up to 450 kg/hr.

You may also be interested in:

Convert Agro waste into fuel

Fuel is the most precious and it is mandatory to save resources for future. As price of fuel is increasing day-by-day, the ultimate solution is white coal made from Agro-Forestry waste. Agriculture wastage is the best Raw Material to produce white coal. This replaces fossil fuel like coal, petrol and diesel.

Associations

© 2013 JK Bio Energy. All rights reserved.